•
calcination temperature
常见释义：
煅烧温度.
1、calcination test ─── 煅烧试验
2、calcination ─── n.煅烧；【化工】焙烧；烧矿法
3、calcination unit ─── 煅烧装置
4、calcination define ─── 煅烧定义
5、temperature ─── n.温度；体温；气温；发烧
6、critical temperature ─── 【物】【电子】临界温度；n.临界温度
7、calcination bone ─── 煅烧骨
8、calcination is ─── 煅烧
9、calcination kiln ─── 煅烧窑
1、The suitable process system, such as
calcination temperature
and calcination time etc. has been found out. ─── 出合适的煅烧温度、煅烧时间等工艺制度。
2、This study, through different
calcination temperature
and calcination time to elect the best of phosphorus adsorption swelling vermiculite. ─── 本研究，通过不同的煅烧温度和煅烧时间选出对磷吸附效果最好的膨胀蛭石。
3、In a proper range, increasing the additive dosage and
calcination temperature
could improve the leaching rate of Au and Ag. ─── 在适当范围内增加添加剂的用量和提高焙烧温度，均有助于金银浸出率的提高；
4、The flux dosage and
calcination temperature
, which affect luminosity of the fluorescent powder, are the major controlling factors. ─── 激活剂用量和煅烧温度影响荧光粉的发光亮度，是主要控制因素。
5、of
calcination temperature
, content of nickel and molybdenum on the selective hydrogenation performance of catalyst were investigated. ─── 载体焙烧温度、金属镍与钼的负载量对催化剂选择性加氢性能的影响。
6、A mild
calcination temperature
and a higher carbonation temperature favored the process and the maximal capture capability could be higher. ─── 温和的煅烧温度和较高的吸收温度下，吸收剂的最大转化率比较高；
7、The results showed that the amount of surface defects and the microstructure of photocatalyst changed with the
calcination temperature
. ─── 结果表明，焙烧温度能引起特定的缺陷数目变化，改变了光催化剂的微观结构。
8、XRD and IR were used to analyze the effect of different
calcination temperature
on phase composition of the precursor. ─── 采用XRD和IR分析不同灼烧温度对前躯体物相组成的影响。
9、The results showed that concentration of the catalyst,
calcination temperature
had some influences on photo catalytic properties. ─── 结果表明，催化剂的浓度和焙烧温度对光催化性能有一定影响。
The influence of the
calcination temperature
on the catalytic activity of zeolitefor the reaction of o-xylene isomerization was investig.
The influence of the
calcination temperature
on the catalytic activity of o - xylene isomerization was investig.
The influence of the
calcination temperature
on the catalytic activity of zeolitefor the reaction of o-xylene isomerization was investigated.
In this paper, the effects of
calcination temperature
, holding time and content of dolomite on the strength and expansion rate of cement mixed with calcined dolomite are investigated.
The maxim strength is found when
calcination temperature
is 600 ℃.
The lower
calcination temperature
compared with other methods can avoid growing and reuniting of powders temperature.
Of pore silica gel,
calcination temperature
should not exceed 200 ℃.
The pore volume and specific surface area of the samples decreased with the increasing
calcination temperature
.