•
interlamination
常见释义：
n.
层间
1、interlardation ─── 交错
2、interlaminating ─── v.插于层间；置于交错薄片间
3、interlineation ─── n.行间书写
4、interlaminates ─── v.插于层间；置于交错薄片间
5、interanimation ─── 互相激励
6、interlunation ─── n.无月期间；黑暗时间
7、interlaminate ─── v.插于层间；置于交错薄片间
8、internalisation ─── n.内化
9、interlaminated ─── v.插于层间；置于交错薄片间
1、In order to achieve this is combined with thin, with upper and lower non-symmetrical structure,
interlamination
insulation film film and built-in part discentralized means. ─── 为实现薄型化，结合使用了层结构上下非对称化、层间绝缘膜薄膜化及内置部件扁平化三种手段。
2、In addition, the instance of pipe string stress is suited, as a result of
interlamination
pressure difference i... ─── 为层流注水工艺解决层间矛盾,调整油层平面上注水分布的均匀性提供了理论依据。
3、
interlamination
resistance ─── 层间电阻
4、but no spot has clearly transfer at electro deposit,
interlamination
density. ─── 而无斑点处镀层已明显转移，层间紧密度好。
5、
interlamination
contact ─── 层间接触
6、Analysis of
Interlamination
Shear Stress of Continuous Reinforced Concrete Compound Pavement ─── 连续配筋砼复合式路面层间剪应力分析
7、Keywords Montmorillonite;Titanium cross-linking;cross-linking agent;Distance of
interlamination
;Specific surface area; ─── 蒙脱石;钛交联;交联剂;层间距;比表面积;
8、indicates that it is suitable to analyse the ultimate load of a cross-ply laminated short beam with the measured shear strength of cross-
interlamination
. ─── 说明了，利用测定的正交层间剪切强度来分析正交铺设层合板短梁的极限载荷是合适的。
9、This behavior caused mainly due to beating beating technology index control when incorrectly, non-performing
interlamination
starch, etc. ─── 变成此本体次要是由于打浆时打浆工艺指标把持不妥，层间淀粉质度不良等。
10、The important relationship between the
interlamination
interface conditions and the pavement ensemble performance is discussed. ─── 揭示了层间界面条件与路面整体性能的重要关系。
11、Late Jurassic, the sag compression uplift along yamasaki, and the stratums was airslake and denudation, forming paleo
interlamination
oxidized zone and uranium mineralization; ─── 晚侏罗世挤压上隆，沿山前遭受风化剥蚀，形成古层间氧化带和铀矿化；
12、This behavior caused mainly due to beating beating technology index control when incorrectly, non-performing
interlamination
starch, etc. ─── 变成此本体次要是由于打浆时打浆工艺指标把持不妥,层间淀粉质度不良等.
13、1.
interlamination
bond strength is not enough. ─── 一.层间会面不弱度不敷。
14、magnetic sheet and strip - methods of measurement of
interlamination
resistance and lamination factor and coat adhesiveness ─── 电工钢片带层间电阻涂层附着性叠装系数测试方法
15、The important relationship between the
interlamination
interface conditions and the pavement ensemble performance is discussed. ─── 揭示了层间界面条件与路面整体性能的重要关系。
16、Distance of
interlamination
─── 层间距