•
underlayer
英：【ʌndəˌleɪə】美：【ʌndəˌleɪə】
英：
美：
常见释义：
n.
下层；底层；衬层
名词复数形式:underlayers
1、under separate cover ─── adv.在另函中
2、underground parking ─── 地下停车场
3、under watch ─── 监视之下
4、bear up under ─── 承受
5、thunder tickets ─── 雷霆门票
6、blunders on the danube ─── 多瑙河上的失误
7、thundering waters ─── 雷鸣般的海水
8、soreness underarm ─── 腋下酸痛
9、clearly understand ─── 清楚地了解；清楚地明白；明了
10、agencies under executive branch ─── 行政分支机构
1、Experiment of the Ladle
Underlayer
Built by No Firing Aluminum-magnesium-carbon Fireproof Bricks ─── 不烧铝镁碳砖砌筑钢包衬的试验
2、Therefore, prospecting and exploitation of coalbed methane should be carried through seams in which lies in
underlayer
of syncline. ─── 向斜下层渗透率和含气量较高，所以煤层气的勘探和开发应以向斜下层煤层为主要目的层进行。
3、It is necessary for flyash soft layer to pave
underlayer
at the top of deep layer mixing reinforced material. ─── 粉煤灰软弱层深层搅拌加固体顶面敷设褥垫层是必要的。
4、This occurs when solvents get trapped in the
underlayer
of a finish. ─── 这种现象发生是因为溶剂被困在里面不能正常挥发。
5、the interaction between head and medium with the soft magnetic
underlayer
. ─── 了软磁衬底存在时，磁头与介质的相互作用。
6、A magnetic head includes a wafer substrate and a conductive
underlayer
formed directly on the substrate. ─── 一种磁头包括直接在衬底上形成的晶片衬底和导电下层。
7、design of replacement
underlayer
thickness is crucial to the replacement method of ground treatment. ─── 换土垫层厚度设计是换填法地基处理设计的关键。
8、The coat is long and thick with a heavy
underlayer
. ─── 外毛长而厚，内毛很重实。
9、An insulating layer is formed above the conductive
underlayer
. ─── 在导电下层上形成绝缘层。
Vaginal smear showed that the proportion of cells in the middle layer and
underlayer
became greater gradually with the increase of exercise times.
The Ag
underlayer
makes grains and magnetic domains small and uniform.
Taking the engineering of the office building of Datong Superhighway Administration Center as the example, this paper makes more detailed introduction of the quality control of
underlayer
replacement.
The design of replacement
underlayer
thickness is crucial to the replacement method of ground treatment.
As can be seen in the example, the more proper replacement
underlayer
thickness can be worked out with only one revisal to meet the demand of engineering design more satisfactorily.
When the hardness of plastic alloy
underlayer
increases, the coefficient of friction has increasing current.